Lab Sand Mill is where good formulations get their first real test. Small samples, quick adjustments, and honest results are what the bench demands. MachineValley makes it compact enough for any busy lab and capable enough to be trusted.
| LSM | Motor Power | Material Out | Bead Diameter | Disk Material | Chamber Volume | Working Volume |
|---|---|---|---|---|---|---|
| Specification | 2HP | 300ml | 0.8-2 MM | SS, TC, HCHC | 3 Liters | 1.5 Liter |
Most lab mills can handle samples as small as 100ml, which you can makes it easy to test a new formula without wasting raw material.
They come close if you keep the same bead type, bead fill, and tip speed. Expect to fine-tune the grinding time when you move to a bigger mill.
Yes, small beads of 0.3 to 0.8 mm are common for fine grinds. Check that the screen opening is small enough to hold them back.
Use the cooling jacket and keep the speed moderate on longer runs. Small volumes heat up fast, so check the temperature every few minutes.
Not really. Remove the vessel, rinse it with a compatible solvent or water, and wipe down the disc and screen.
